Plug the receiver into the USB port #1 on the Playstation 3 console, then turn on the console.
Open the battery compartment on the bottom of the racing wheel.
Insert 4 AA batteries into the compartment. Make sure that the positive ( + ) and negative ( - ) terminals on the batteries align with the ( + ) and ( - ) symbols in the battery compartment.
Replace the battery compartment cover.
Connect the foot pedal to the racing wheel, then turn on the power switch on the racing wheel. The LED lights red.
Press HOME to select the port the racing wheel is connected to. The corresponding LEDs light on the receiver plugged into the console. In some games, the racing wheel must be assigned to controller 1.
Press and hold HOME and assign the racing wheel to controller 1. The red LED above the power switch indicates that the wireless connection has been made successfully. If the LED is not on, make sure that the receiver is plugged in and the batteries are installed correctly, then turn the racing wheel off then on again. The LED should light within 10 seconds.