This sound bar mount is only designed to be used with RF-TVMLPT01, RF-TVMLPT02, RF-TVMLPT03, RF-TVMFM01, RF-TVMFM02, RF-TVMFM03, DX-TVM111, DX-TVM112, DX-TVM113, DX-DRTVM102, DX-DRTVL103, DX-DRTVM112, DX-DRTVM114 and Sanus VisionMount TV mounts.
The weight of your soundbar must not exceed 15 lbs. (6.8 kg).
The weight of your soundbar, soundbar mount, and TV must not exceed your TV wall mount’s maximum weight limit. See the documentation that came with your TV wall mount for more information.
If your TV wall mount has built-in or integrated spacers, you cannot use this product.
If your TV wall mount has mounting holes or slots that are wider than 11 mm (.43 in.), you cannot use this product.
You can find installation instructions in the soundbar mount’s User Manual, which is available on the Rocketfish website (www.rocketfishproducts.com). To go to the product page, type “RF-SBM101” into the search bar, then click Search. The User Manual can be downloaded from the Support/Downloads tab.
You must use the screws and washers that were provided with the soundbar mount. Do not use the screws and washers that came with your existing TV wall mount. Note: If the provided screws and washers do not fit, see Question 7 for more information.
Use the larger washers (GG or HH) unless they do not fit your TV.