Home Theater

[josephwlong]

this will sound very basic. i have a typical 5.1 dolby surround sound wired system setup. on the rocketfish site i am able to find the various component parts necessary to convert it to a wireless system but am looking for something that shows a typical setup with all the components i'll need to convert my setup to a wireless one. is there a section on the site that shows typical setups with all the components required?

[Tom-RF]

Hello josephwlong,

Unfortunately there isn't a place on the site to help you build your wireless system because of the massive amount of possibilities.  However if you post what system components you have, how they are connected to each other, and were you want to incorporate wireless components I can give you my recommendations.

Regards,
Tom
Insignia™ Support

[josephwlong]

Thanks Tom. I'll post the details of my setup a little later this week. Appreciate the reply.

Joe

[josephwlong]

Hi Tom. Here is what I have:
Sony DA50ES
Front speakers Boston Micro90x
Rear speakers Boston VRS pro
Center Boston VR12
Sub Energy e:XL-S12

[Tom-RF · Accepted solution]

Hello Joe,

Based on the setup you currently have I would recommend the following to products:

RF-WHTIB  to wirelessly connect the rear speakers.

RF-WSW312 to wirelessly connect the subwoofer.

That would leave your front and center channel speakers wired to the stereo.  I usually recommend limiting the wireless components to help prevent interference and keep the setup as simple as possible.  Hope that helps!

Regards,
Tom
Insignia™ Support

[josephwlong]

thanks Tom, appreciate the help.